Stainless Steel Slit Coils

Product Details:

310 Stainless Steel Slit Coils is an austenitic stainless steel that combines excellent high-temperature properties with good ductility and weldability. It is typically used for elevated temperature applications as its high chromium and nickel content provide solid corrosion resistance, excellent resistance to oxidation, and superior strength in temperatures up to 2100°F. Due to its high chromium and nickel content, it is superior to 304 or 309 stainless in most environments.

Applications:

• The higher alloyed stainless steels generally have excellent strength at elevated temperatures along with outstanding resistance to creep deformation and environmental attack. Therefore, Stainless Steel Slit Coils 310 is used widely in industries such as heat treatment and chemical processing.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7Days

Product Details:

409 Stainless Steel Slit Coils is generally considered to be weldable by the common fusion and resistance techniques. Special attention should be given to avoid brittle weld fractures during fabrication, this includes minimizing discontinuities, maintaining low weld heat input, and occasionally warming the part somewhat before forming. Stainless Steel Slit Coils 409 is generally considered to have slightly poorer weldability than the most common ferritic stainless steel grade 409. A major difference can be attributed to the addition of alloy, to control hardening which results in the need for higher heat input during welding.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 days

Product Details:

304 Stainless Steel Slit Coils:

• Can be exposed continuously without appreciable scaling to a max of 1600°F(871°C)
• Maximum exposure temperature is about 1450°F (788°C), for intermittent exposure
• Has an oxidation weight gain of 10mg/cm 2 in 1,000 hours, in temperatures over 1600°F (871°C)

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: 7 days

Product Details:

304L Stainless Steel Slit Coils:

• Subject to work hardening during deformation
• Subject to chip breaking
• Best results achieved through slower speed, heavier feeds, good lubrication, and sharp tooling

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 2 Days

Product Details:

316 Stainless Steel Slit Coils is a T-300 series stainless steel austenitic, which has a minimum of 18% chromium and 8% nickel with a maximum of 0.08% carbon. It is the standard “18/8 stainless” that is commonly found in pans and cooking tools. Stainless Slit Coils 304 Half Hard is the most versatile and widely used alloy in the stainless steel family. It may be used for a wide variety of home and commercial applications and exhibits excellent corrosion resistance, has a high ease of fabrication, outstanding formability, and tremendous strength. The austenitic stainless steels are also considered to be the most weldable of the high-alloy steels and can be welded by all fusion and resistance welding processes. Due to its controlled carbon content of 0.04 to 0.10, Stainless Slit Coils 304 Half Hard provides improved high-temperature strength when exposed to temperatures above 800oF. Stainless Slit Coils 304 Half Hard also has a greater short term and long term creeps strength than Alloy 304L at temperatures above 500oC and is more resistant to sensitization than Alloy 304L.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 days

Product Details:

316L Stainless Steel Slit Coils is a T-300 series stainless steel austenitic, which has a minimum of 18% chromium and 8% nickel with a maximum of 0.08% carbon. It is the standard “18/8 stainless” that is commonly found in pans and cooking tools. Stainless Slit Coils 304 Half Hard is the most versatile and widely used alloy in the stainless steel family. It may be used for a wide variety of home and commercial applications and exhibits excellent corrosion resistance, has a high ease of fabrication, outstanding formability, and tremendous strength. The austenitic stainless steels are also considered to be the most weldable of the high-alloy steels and can be welded by all fusion and resistance welding processes. Due to its controlled carbon content of 0.04 to 0.10, Stainless Slit Coils 304 Half Hard provides improved high-temperature strength when exposed to temperatures above 800oF. Stainless Slit Coils 304 Half Hard also has a greater short term and long term creeps strength than Alloy 304L at temperatures above 500oC and is more resistant to sensitization than Alloy 304L.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

we are stockiest of 1.4509 / ss 441 grade sheets and coils in 2b finish,No,4 finish used in elevator and interior works

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

we have ready stock for ss 202 J4 ( 1% nickel) coils and sheets in no.4 finish and 2b finish . thickness from 0.5mm to 3mm 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

ss 410 coils jindal,salem,posco make with custom width and length we can supply

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)